The Weather Pack hand crimping tools range from 24 to 12 gauge are quality made by an OEM tool manufacturer. The release tool is designed solely for Weather Pack terminals to allow removal from connectors. All are made in the USA.
Our T-18 crimps Weather Pack terminals and seals. Its compact, low-cost parallel jaw design eliminates terminal rocking. This tool, which is offered exclusively by White Products, also crimps Metri-Pack terminals and seals.
This is the "Easy Crimp" version of our popular T-18 tool that crimps the most common Sealed Metri-Pack 150, Sealed Metri-Pack 280, and Weather Pack terminals and seals. The new frame features a compound leverage mechanism and longer handles to provide a mechanical advantage that makes crimping a breeze.
Equivalent to: Delphi/Packard 12014254, SPX Kent Moore J-38852
Crimps Weather Pack terminal and seal in one cycle. Features two double cavities, an orientation block and a ratchet mechanism to ensure that each crimp cycle is completed. Factory calibrated to be used only with Weather Pack terminals and seals. Wire range 20-14.
Equivalent to: Delphi/Packard 12085270, SPX Kent Moore J-38125-6
Five cavities cover a wide variety of Weather Pack and Metri-Pack applications. Ratchet mechanism ensures that each crimp cycle is completed. Wire range 20-14.
This special-purpose tool crimps 12-gauge Weather Pack terminals along with sealed Metri-Pack 280 terminals in the largest wire sizes, 12 and 10 AWG. It can also be used to perform the conductor crimp on most other open barrel terminals in the 12-10 range. The ratchet mechanism ensures that each crimp cycle is completed.
Equivalent to: Delphi/Packard 12014012, SPX Kent Moore J-38125-10A
Designed solely to depress Weather Pack terminal retention barbs to allow terminal removal from tower or shroud.