Adhesive Lined Heat Shrink Butt Connectors

• The finest environmentally-sealed splicing device available
• The best seal
• The best strain relief
• Tough cut-resistant insulation
• Resistance to most chemicals
• Seamless annealed copper tube within a tough TMW polyolefin heat shrink insulation lined with heat-activated adhesive
• Crimp with standard crimp pliers and heat
• With 275° F of heat applied with heat gun or torch, the insulator shrinks tightly to wire and the adhesive flows to seal the splice.
• Rated for temperature range -67° F to +230° F.

Wire Range	Part Number	Color
22-18 gauge	61-SH	Red
16-14 gauge	62-SH	Blue
12-10 gauge	63-SH	Yellow

---

Cold Crimp Moisture Resistant Butt Connectors

• No heat gun or torch required
• Good protection with easy installation
• Installed with standard crimp pliers
• Tough translucent Nylon insulator
• Double-crimp brass insulation grips
• Fully annealed E.T.P. copper interior
• Filled with non-toxic heat-stabilized grease
• Resistant to salt spray and most automotive chemicals  

  Wire Range	Part Number	Color
  22-18 gauge	61-NBM	Red
  16-14 gauge	62-NBM	Blue
  12-10 gauge	63-NBM	Yellow